BR5-36

Exposed Fastener Panel- Wall and Roof System



BR5-36 is a sturdy panel with 36” [914 mm] coverage, and uniformly spaced ribs at 7.2” [183 mm] o/c. As a wall panel BR5-36 laps in the low cell. As a roof panel, BR5-36 is inverted so that the side lap occurs in the high cell.

Notes

  1. For information on special applications, contact your local Sales Representative.
  2. Minimum of roof slope = 1” in 12” [25mm in 305mm].
  3. Panel length tolerance is ± 1/4” [6mm].
  4. For protective coatings - see color chart.
  5. Oil canning within mill tolerances will not be cause for rejection.
  6. Panels must be ordered as “roofing” or “siding” to ensure painting of proper surfaces.
  7. BR5-36 must be inverted for roofing.